What should you consider when taking out a mortgage?
A mortgage should not be selected solely on the basis of the lowest interest rate. Sufficient equity, sustainable long-term affordability, the appropriate interest-rate model, amortisation, and the costs and contractual conditions applying to renewal, sale or early termination are equally important.
Briefly explained
For owner-occupied residential property, banks commonly finance no more than approximately 80 percent of the lending value. At least 10 percent must come from equity that has not been withdrawn or pledged from the second pillar. For new financing and loan increases, the mortgage must be amortised to two-thirds of the lending value within no more than 15 years. Each bank calculates affordability according to its own requirements and using long-term safety assumptions. A low current interest rate alone therefore does not mean that a property is sustainably affordable.
What is a mortgage?
A mortgage is a loan secured by a lien on a property. The bank provides part of the purchase price. The land, house or apartment serves as security.
The borrowers undertake in particular to:
- pay the mortgage interest regularly,
- complete the agreed direct or indirect amortisation,
- maintain the value of the property,
- comply with information and contractual obligations,
- maintain sufficient building insurance where required,
- notify the bank of important changes in their financial or personal circumstances where required by the contract.
If the mortgage can no longer be serviced over the long term, the bank may realise its security. A mortgage is therefore not simply an interest-rate decision, but a long-term obligation connecting income, assets, pension provision and personal planning.
First and second mortgage
Swiss banking practice commonly distinguishes between a first and second mortgage:
| Area | Common classification | Amortisation |
|---|---|---|
| First mortgage | Financing up to approximately two-thirds of the lending value. | Further amortisation is frequently not mandatory provided affordability and the bank’s conditions continue to be satisfied. |
| Second mortgage | Financing above two-thirds and up to the maximum loan-to-value ratio accepted by the bank. | Must generally be reduced to two-thirds of the lending value within the prescribed period. |
Whether the bank manages these parts as separate agreements depends on the institution and the selected model. The main considerations for borrowers are the amount that must be amortised and the conditions applying to both portions.
How much equity is required?
For owner-occupied residential property, banks commonly require equity of approximately 20 percent of the lending value. The specific maximum loan-to-value ratio depends on the bank, property, income, age, use and risk assessment.
At least 10 percent outside the second pillar
At least 10 percent of the lending value must come from equity that is not based on an advance withdrawal or pledge of occupational pension assets.
Depending on the bank and financing structure, possible forms of equity may include:
- bank and savings balances,
- securities and other pledgeable assets,
- pillar 3a assets,
- surrender values of certain insurance policies,
- advances on inheritance and gifts,
- certain private loans with an assignment or subordination agreement,
- under certain conditions for owner-occupied residential property, loans from close family members,
- second-pillar assets for the portion exceeding the required equity outside occupational pension provision.
The purchase price and lending value are not always identical
The bank does not automatically use the agreed purchase price as the financing value. It values the property and determines a lending value, which may be below the purchase price.
Example with a lower lending value
Property purchase price: CHF 1'100'000
Bank lending value: CHF 1'000'000
Maximum mortgage at 80%: CHF 800'000
Required funds:
20% of the lending value: CHF 200'000
Difference between price and value: CHF 100'000
------------------------------------------------------
Total required equity: CHF 300'000
plus purchase costs and reserves
The difference between the higher purchase price and lower lending value must be financed entirely using equity that does not come from the second pillar. An excessive purchase price may therefore significantly increase the equity requirement.
Withdraw or pledge pension fund assets?
| Option | Effect | Important disadvantage |
|---|---|---|
| Advance withdrawal | The pension capital is paid out and used as equity. | The pension balance and potentially future retirement, disability or survivor benefits decrease. |
| Pledge | The pension capital generally remains in the pension fund and serves as additional security for the bank. | The mortgage remains higher, as does the ongoing interest and affordability burden. |
An advance withdrawal should not be assessed solely on the basis of the short-term increase in available equity. Taxes on the capital payment, pension gaps, repayment obligations following a later sale and affordability during retirement are also important.
How is mortgage affordability calculated?
Affordability indicates the extent to which sustainable income is burdened by the long-term costs of owning the property. Banks do not base this assessment solely on the current mortgage rate, but use imputed assumptions and their own safety requirements.
Typical components of the bank’s calculation
- imputed mortgage interest,
- required amortisation,
- property maintenance and ancillary costs,
- existing loans, leasing agreements and other obligations,
- sustainable eligible income,
- depending on the bank, age, employment status and long-term income security.
As sustainable supervisory criteria for owner-occupied residential properties, FINMA cites, for example, a burden limit of 33 percent of sustainable gross income together with an imputed interest rate of 5 percent and imputed ancillary costs of 0.8 percent of the lending value for properties in nearly new condition. This is not a single statutory formula applying to every household. Banks may apply stricter or differently structured criteria.
Simplified affordability example
Purchase price: CHF 1'000'000
Lending value: CHF 1'000'000
Mortgage: CHF 800'000
Household gross income: CHF 180'000
Imputed interest at 5%: CHF 40'000
Ancillary costs at 0.8%: CHF 8'000
Estimated annual amortisation: CHF 8'900
------------------------------------------------------
Imputed annual financial burden: CHF 56'900
Burden in relation to income: approx. 31.6%
The actual monthly burden may be substantially lower when market interest rates are low. Several scenarios should nevertheless be calculated before purchasing.
Personal stress test
Calculate the financing for the following situations as well:
- significantly higher mortgage rates,
- part-time work following the birth of a child,
- temporary unemployment,
- long-term illness or disability,
- separation or divorce,
- major renovations,
- retirement with a lower income,
- unexpected condominium ownership costs.
Which mortgage models are available?
Fixed-rate mortgage
With a fixed-rate mortgage, the interest rate is fixed for an agreed term. The interest costs therefore remain predictable during this period.
Advantages:
- high degree of budget certainty,
- protection against increasing market rates during the term,
- straightforward financial planning,
- suitable for households with limited risk capacity.
Disadvantages:
- no direct benefit from falling rates,
- limited flexibility during the fixed term,
- potentially high costs for early termination,
- renewal risk at the end of the term.
SARON mortgage
With a SARON mortgage, the interest rate is based on a money-market reference rate. The bank margin agreed in the contract is added to the calculated SARON.
Advantages:
- more direct adjustment to the interest-rate environment,
- potentially less expensive when short-term rates are low,
- depending on the framework agreement, greater flexibility than a long fixed-rate mortgage,
- transparent separation between the reference rate and bank margin.
Disadvantages:
- interest costs can increase rapidly,
- less budget certainty,
- contracts frequently contain minimum or base-rate provisions,
- SARON products may also have fixed framework terms and termination conditions.
Variable mortgage
With a variable mortgage, the institution sets the interest rate and may change it. These mortgages are often more flexible to terminate, but may be more expensive than other models.
They may be used as a short-term transitional solution where a property is to be sold soon or the borrower has not yet decided which long-term model to select.
Overview of the models
| Criterion | Fixed-rate mortgage | SARON mortgage | Variable mortgage |
|---|---|---|---|
| Interest-rate certainty | High during the term. | Low because the rate is regularly adjusted. | Low because the bank may change the rate. |
| Opportunity when rates fall | No immediate effect. | Generally possible. | Depends on the bank’s pricing policy. |
| Risk when rates rise | Limited until the end of the term. | Immediate higher burden. | A higher burden is possible. |
| Flexibility | Usually low. | Varies according to the framework agreement. | Frequently higher. |
| Early termination | May be very expensive. | Check the contract and framework term. | Frequently possible with a shorter notice period. |
| Suitable for | Planning certainty and limited risk capacity. | Financial flexibility and a greater tolerance of interest-rate fluctuations. | Transitional or special situations. |
Choosing the right interest-rate strategy and term
The appropriate term does not depend solely on a personal interest-rate forecast. Financial risk capacity, personal plans, the possibility of a sale and the ability to bear higher interest costs are more important.
Questions to consider before choosing
- How much may the interest burden fluctuate?
- How long is the property likely to be retained?
- Could a sale, move or divorce occur during the term?
- Is sufficient liquidity available to absorb higher interest rates?
- When will retirement begin?
- Which amortisation is planned?
- Should it be possible to transfer the mortgage to another bank later?
Dividing the mortgage into several tranches
Dividing the mortgage can prevent the entire amount from having to be renewed on the same date. This reduces the risk of having to refinance the complete mortgage during a period of high interest rates.
However, dividing the mortgage also has disadvantages:
- different maturity dates make it more difficult to switch banks,
- a single tranche frequently cannot be transferred to another institution independently,
- several agreements increase complexity,
- smaller tranches may receive less attractive conditions,
- the strategy may create long-term dependence on the same bank.
Do not rely solely on interest-rate forecasts
Even experts cannot reliably predict interest-rate developments over many years. A robust strategy should therefore not only work under the expected scenario, but remain affordable if developments are unfavourable.
How must a mortgage be amortised?
For new financing and loan increases, the mortgage must be reduced to two-thirds of the lending value within no more than 15 years. Required direct amortisation is generally linear and begins no later than within the applicable period following payment of the loan.
Direct amortisation
With direct amortisation, the mortgage is regularly reduced.
Advantages:
- the mortgage debt decreases immediately,
- interest costs decrease where the rate remains unchanged,
- the loan-to-value ratio and financial risk are reduced,
- simple and transparent.
Disadvantages:
- less liquidity for other purposes,
- tax-deductible debt interest may decrease under the current system,
- the repaid capital is tied up in the property.
Indirect amortisation
With indirect amortisation, the agreed amount is paid into a solution such as pillar 3a. The pension assets are pledged to the bank and later used to reduce the mortgage.
Advantages:
- accumulation of pension capital,
- possible tax deductions for pillar 3a contributions,
- the mortgage and debt interest initially remain higher,
- structured combination of pension provision and amortisation.
Disadvantages:
- the higher mortgage remains in place for longer,
- greater dependence on interest rates,
- the capital is tied under pension law,
- returns and fees of the pension solution influence the result,
- changes to the tax system may alter the calculation.
| Criterion | Direct amortisation | Indirect amortisation |
|---|---|---|
| Mortgage debt | Decreases continuously. | Initially remains unchanged. |
| Interest costs | Generally decrease. | Remain based on the higher mortgage amount. |
| Pension capital | No automatic additional accumulation. | Accumulation through the pledged pension solution. |
| Flexibility | Capital is tied directly in the property. | Capital is tied in the pension solution. |
| Complexity | Relatively simple. | More coordination between the mortgage, bank and pension provision. |
The better option depends on income, the tax situation, pension gaps, the interest rate, investment horizon and risk capacity. Comparing tax deductions alone is not sufficient.
Which additional costs must be considered?
Mortgage interest is only one component of the total housing costs. A complete budget includes all one-off and ongoing expenses.
One-off purchase and financing costs
- notary costs,
- land register fees,
- cantonal property transfer taxes or comparable charges where applicable,
- costs for the mortgage note or property lien,
- bank valuation and processing fees,
- financing or advisory costs,
- moving and furnishing,
- immediately necessary renovations.
These costs vary according to the canton and contract and are frequently not financed in full by the mortgage.
Ongoing costs
- mortgage interest,
- amortisation,
- building insurance and other insurance policies,
- energy, water and charges,
- maintenance and repairs,
- taxes and possible property charges,
- administration costs for condominium ownership,
- contributions to the renovation fund,
- major periodic refurbishment.
Renovation reserve
The ancillary costs used in a bank’s affordability calculation do not guarantee that the amount is sufficient for the specific property. The actual requirement may be substantially higher for older houses, properties requiring renovation or condominiums with an inadequately funded renovation reserve.
How should mortgage offers be compared?
The advertised interest rate is only one point of comparison. Two offers with similar rates may differ considerably in flexibility, fees, amortisation and termination costs.
| Point to check | Important question |
|---|---|
| Interest rate | Is the rate binding and to which amount and period does it apply? |
| Bank margin | How high is the margin for a SARON mortgage and can it be changed? |
| Interest-rate floor | Is there a contractual minimum reference rate? |
| Term | Does the commitment match the planned holding period and personal circumstances? |
| Amortisation | How high are the annual payments and are additional repayments permitted? |
| Fees | Are there conclusion, valuation, amendment, renewal or account fees? |
| Early termination | How is the early repayment penalty calculated? |
| Sale and change of property | Can the mortgage be transferred to a new property? |
| Changing banks | Which notice periods and administrative costs apply? |
| Tranches | Do different terms make it more difficult to switch providers later? |
| Additional products | Is the interest rate linked to accounts, insurance or pension products? |
| Binding status | Is this a non-binding indication or a definitive credit approval? |
Compare total costs rather than only the nominal rate
Comparison template
Provider: [name]
Mortgage amount: CHF [amount]
Model: [fixed / SARON / variable]
Interest rate or margin: [details]
Contract term: [years]
Annual interest costs: CHF [amount]
Annual amortisation: CHF [amount]
One-off fees: CHF [amount]
Recurring fees: CHF [amount]
Additional amortisation possible: [yes / no]
Early termination costs: [calculation]
Transfer to another property: [conditions]
Notice period: [details]
Additional products required: [details]
Request offers from several providers
Compare banks, insurance companies, pension funds and mortgage brokers using the same property and financing information. Only then are the offers genuinely comparable.
Professional advice may be useful, but it should transparently disclose:
- which providers are considered,
- how the adviser is remunerated,
- whether commissions or brokerage payments are received,
- whether the comparison covers the entire market or only contractual partners,
- which services are provided after the agreement has been concluded.
Which contractual and personal risks are important?
Early termination of a fixed-rate mortgage
If a fixed-rate mortgage is terminated before the agreed end date, the bank may charge an early repayment penalty. Depending on the remaining term, interest-rate level, mortgage amount and contract, this may be very high.
Possible reasons include:
- sale of the property,
- separation or divorce,
- moving abroad,
- an inheritance and early repayment,
- switching to another institution,
- major restructuring of the financing.
Before concluding the agreement, check whether a transfer to a new property, assumption of the contract by the buyer or another special arrangement is possible. There is no automatic entitlement to such a solution.
Interest-rate risk
A SARON or variable mortgage may become considerably more expensive if rates rise. With a fixed-rate mortgage, the interest-rate risk primarily arises at maturity when the financing must be renewed.
Income risk
The financing should not work only with today’s income. Allow for possible changes such as children, part-time work, self-employment, unemployment, illness or retirement.
Mortgage insurance
Term life or disability insurance may be useful where affordability depends heavily on one person or where family members could not retain the property following a loss of income.
Such insurance does not replace a solid financing structure. The following should be checked in particular:
- insured events,
- insured amount,
- health assessment,
- waiting periods,
- exclusions,
- benefit duration,
- beneficiary designation or pledge in favour of the bank.
Changes in the property’s value
If the property value falls, the loan-to-value ratio increases mathematically. This may become particularly important when selling, refinancing, increasing the loan or where the original financing was tight.
Conversely, increases in value should not be regarded as a guaranteed substitute for amortisation and reserves.
What should be considered before retirement?
Many households have less disposable income after retirement. The bank may therefore examine whether the mortgage remains affordable using retirement income.
Plan early
Ideally, the financing should be reviewed several years before retirement. Important questions include:
- How high will state pension, pension fund and other retirement income be?
- How high will the mortgage be at retirement?
- Will retirement income satisfy the bank’s imputed affordability calculation?
- Should additional amortisation be completed?
- How much liquidity will remain after amortisation?
- Are renovations or energy improvements approaching?
- Is the property suitable for older occupants?
- Would a sale or smaller property make more sense over the long term?
Renewing the mortgage or changing banks
Begin planning the follow-on financing early. The necessary preparation period depends on the agreement, model and provider.
Check before renewal
- the exact maturity date of every tranche,
- notice and notification periods,
- the current mortgage debt,
- the property’s updated lending value,
- changes in income and assets,
- planned renovations or loan increases,
- direct or indirect amortisation,
- possible costs of changing banks,
- transfer or amendment of the mortgage note.
Do not automatically accept the renewal offer
Existing customers do not necessarily receive the best available conditions automatically. Compare the renewal offer with several alternatives and negotiate the rate, margin and fees.
Changing providers is easiest when all tranches expire at the same time. Staggered terms may restrict a switch or temporarily make it uneconomical.
Practical examples
Example 1: Purchase price above the bank valuation
A family purchases a house for CHF 1.2 million. The bank values it at CHF 1.1 million. Even if the bank finances up to 80 percent of the lending value, the family must pay the additional difference of CHF 100'000 using equity outside the second pillar.
Example 2: Low market rate but insufficient affordability
The actual interest costs appear easily affordable for a couple. However, the burden exceeds the bank’s accepted income ratio when imputed interest, amortisation and ancillary costs are included. The property is too expensive despite the low current rates.
Example 3: Long fixed-rate mortgage and unexpected sale
A homeowner concludes a ten-year fixed-rate mortgage but must sell the property after three years. Because the bank cannot transfer the mortgage to a replacement property, a high early repayment penalty is charged.
Example 4: Staggered tranches make switching difficult
A mortgage was divided into three fixed-rate mortgages with different maturity dates. When the first tranche expires, the homeowner wishes to change banks. The new institution wants to assume the entire financing, while the other two tranches still have several years remaining.
Example 5: SARON rate increases
A household selects a SARON mortgage and initially benefits from low costs. The reference rate and total interest rate later rise substantially. Because sufficient reserves were planned, the financing remains affordable.
Example 6: Affordability during retirement
A couple can comfortably afford the mortgage using their employment income. After retirement, their pension income no longer satisfies the bank’s internal affordability calculation. The financing is adjusted through early additional amortisation and the accumulation of a renovation reserve.
Step by step to the right mortgage
- Record the household budget and sustainable income.
- Separate the available equity according to its source.
- Plan purchase costs and a liquidity reserve separately.
- Calculate a realistic maximum purchase price.
- Critically assess the property value and possible lending value.
- Calculate affordability using imputed and higher interest-rate scenarios.
- Analyse the property’s renovation and maintenance requirements.
- Compare fixed-rate, SARON and other models based on personal risk capacity.
- Compare direct and indirect amortisation.
- Obtain several comparable financing offers.
- Check fees, early termination costs and switching conditions.
- Obtain financing confirmation before making a binding purchase commitment.
- Coordinate the purchase agreement, land register, mortgage note and financing.
- Review the mortgage after changes in circumstances and before every renewal.
Checklist: Reviewing a mortgage completely
Equity and purchase price
Affordability
Mortgage model and contract
Offer comparison and protection
Frequently asked questions about mortgages in Switzerland
Summary
The interest rate and term are important when selecting a mortgage, but they are not the only decisive factors. Solid financing begins with sufficient equity, a realistic property valuation and an affordability calculation that also considers higher interest rates, amortisation, maintenance and changes in personal circumstances. Fixed-rate, SARON and variable mortgages differ primarily in terms of interest-rate certainty, flexibility and termination risk. Direct and indirect amortisation, purchase-related costs, renovation reserves, pension provision, retirement and the possible cost of a later sale or bank switch should also be examined. The best offer is therefore not necessarily the mortgage with the lowest advertised rate, but the financing solution that suits the household and property over the long term.